The consumption of environmental friendly inks in China will rise significantly in 2012
the three major printing consumables with large consumption in production are inks, plates and paper. In an interview, yuanjianxiang, Secretary General of the printing equipment branch of China printing and equipment industry association, predicted that the use of the three major consumables will continue to grow steadily in 2012, and there are two development themes, one is the growth of the use of environmentally friendly green materials, the other is the improvement of the technical level of consumables. What is the development route of the three major printing equipment in 2012? In this regard, we interviewed industry experts
ink: the consumption of environmental friendly ink will increase significantly
according to Yuan Jianxiang, the final data of the total amount of ink used in 2011 has not been calculated, but it is expected to increase by about 10%. By 2012, its total production will still maintain this steady growth trend and show the characteristics of developing towards green environmental protection. In terms of total production, the traditional offset printing ink is still the largest kind of ink. Although there is a large gap between the amount of environmental friendly ink and traditional ink, its characteristics of reducing pollution emissions make it have a fast market share. Yuan Jianxiang predicted that with the increase of the number of enterprises participating in the green printing qualification certification, the application of environmental friendly inks will definitely increase significantly in 2012
the varieties of environmental friendly green inks on the market are also more and more diversified. The new products with outstanding performance include water-based inks and soybean inks, which reflect the trend that vegetable oil will replace mineral oil. At the same time, the relevant national policies put forward more and more strict requirements for the emission of organic volatiles, and manufacturers also began to pay attention to reducing the production of traditional ink containing benzene
yuan greatly met the needs of customers. Jianxiang believed that from the perspective of domestic demand, the current production technology level and production capacity of domestic ink manufacturers basically meet the needs of the current market. At present, there are 11 to 12 domestic ink enterprises with an annual output of more than 10000 tons, including Ye's ink (Group) Co., Ltd., Tianjin Dongyang Ink Co., Ltd., HANGHUA chemical Ink Co., Ltd., Zhejiang New Oriental ink Co., Ltd., Zhejiang yongzai Chemical Co., Ltd., Shanghai Peony ink Co., Ltd., etc. Among them, all production enterprises are vigorously promoting green ink. It is understood that the environmental friendly ink produced by Tianjin Dongyang Ink Co., Ltd. has accounted for more than 20% of its total output, while Guangdong Tianlong ink Group Co., Ltd. took out the samples immediately after the experiment, and mainly produced water-based environmental friendly ink. According to China publishing news, Suzhou bright Ink Co., Ltd., as an emerging manufacturer specializing in the production of green ink, is actively promoting the market. Its new generation formaldehyde free and phenolic free green offset printing ink project won the national top 100 scientific and Technological Innovation Award in the printing industry in 2011
plate: digital technology leads the change of plate market pattern
yuan Jianxiang said that China, as a major plate producer, will maintain a steady growth in its production in 2012. However, affected by digital printing, the growth rate of plate production is actually slowing down. It is expected that the growth rate of total production in 2011 and 2012 will be lower than that in 2008 and 2009. Among the plate varieties, CTP plate is the fastest-growing one, and its total amount and the total production of PS plate show a trend of ebbing and flow. He predicted that the installed capacity growth of CTP in 2012 would be basically the same as that in 2011. The consumption of CTP plates will continue to maintain the growth rate of 2011 in 2012
talking about the reasons why CTP plates are developing so fast, Yuan Jianxiang believes that first, the production technology of domestic plate manufacturing enterprises has made great progress. With the domestic enterprises' production capacity of CTP equipment and plates from scratch, and the quality from low to high, the number of production enterprises is also increasing, and the output is also rising rapidly. Second, the international price of aluminum and silver rose sharply, and the price of plate making film increased by 60%~70%. Printing enterprises should check whether the price of one PS plate plus one film is higher or lower than that of CTP plate. Although the introduction of CTP requires a one-time investment of millions of yuan, in the long run, it not only saves the intermediate process, shortens the production time, but also reduces the price. Why not? This has become the external reason for the rapid development of CTP
under the background that the plate manufacturing enterprises are gradually adjusting to the needs of the development of digital technology, Yuan Jianxiang introduced that the large-scale plate manufacturing enterprises have more and more obvious advantages in competition. Their advantages in technology research and development, capital and cost advantages caused by large output make their sales situation better and better and their market share higher and higher. On the contrary, small and medium-sized production enterprises, especially small enterprises, are struggling to make a living due to their low technical level
paper: eliminate backward production capacity and strengthen structural adjustment
in 2012, the paper industry will continue to face the pressure of structural adjustment, energy conservation and emission reduction, and the elimination of backward production capacity. Zhao Wei, vice president and Secretary General of the China Paper Association, recently said that the production and sales of the domestic paper industry will remain basically stable in 2011. It is expected that the total production of paper and paperboard in 2011 will be about 100 million tons, with an increase of about 7%, The production growth in 2012 will basically maintain the growth rate in 2011. In the case of total growth, in terms of specific paper types, Xia Lifeng, a senior engineer of the printing equipment branch of the China equipment and equipment industry association, believed in an interview with China publishing news that the amount of printing paper in each paper type will still increase, the amount of paper used may fluctuate, and the amount of packaging and printing paper will also increase significantly
according to the analysis of production and import and export volume, Zhao Wei predicted that the domestic consumption in 2011 was about 98million tons, and the situation that the export volume was greater than the import volume continued, in which the total export volume would increase and the total import volume would decrease slightly. This trend is expected to continue in 2012. Zhao Wei believes that the increase in export volume is mainly due to the growth of total domestic production, the improvement of product quality and the increase of varieties. The production volume of most products in China has basically been able to meet the domestic market demand; At the same time, the production capacity of most domestic products has increased rapidly in recent years, and the production scale of enterprises has become larger and larger. In order to seek the balance between production and marketing, we have increased the production and export of products at the same time, which has led to the continuous increase of the export volume of China's paper products in recent years
in recent years, many famous papermaking enterprises have invested in the construction of production lines. While the production capacity increases, it also indicates that the competition in the paper market will be more intense in 2012. For example, the coated paper production lines of Hainan Jinhai Pulp Paper Co., Ltd., Shandong Huatai Group Co., Ltd. and Shandong Chenming Paper Group Co., Ltd. under app (China) have been put into operation successively, and the production capacity has been gradually released
Zhao Wei believes that at present, the overall level of China's paper industry is not high enough. It is necessary to optimize the structure, improve the transformation, eliminate backward production capacity, enhance the ability of new product development, and practice internal skills in technology, management, cost control, etc., so as to realize the transformation of the paper industry from quantity oriented to quality and benefit oriented
this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after China's waste paper import policy becomes stricter
LINK
Copyright © 2011 JIN SHI